There are currently no reviews, be the first to add one.
Post a Review
Other products you may be interested in.
Camec 3 Point Door Lock, Barrel And Keys
This Lock, Barrel and Key suit the Camec 3 Point Door.
To Remove the Lock Barrel from the Main Door Lock
Once you have removed the main door lock from the Camec Security door, hold the handle open and turn and pull the rear metal lock activator (cylinder). When removing the key barrel, work from the rear, push the small detent ball down into the lock whilst rotating the lock so that the square protrusions on the lock line up with the gaps in the housing. You should now be able to slide the lock out from the front.
To Fit the Lock Barrel to the Main Door Lock
To fit the lock barrel to the main door lock put the key into the lock and turn so as to line up the square protrusions on the lock with the gaps in the housing. Put the barrel at an angle so that the detent ball goes into the housing first and depresses whilst the rest of the lock is pushed in. The detent ball should extend and secure the lock in place.